Robart Super Stand II
Fast to set up for any building, maintenance,
or transportation needs, the Super Stand II
is fully adjustable to fit any-size RC airplane.
Sturdy, lightweight, and unaffected by
glow fuel, the stand is equipped with soft
rubber pads to prevent damage to your
$26.45 | robart.com
Sullivan Marcy’s Marvelous
Made out of anodized aluminum, these chocks
are designed for maximum safety and security
for your plane during transport. They conserve
space in trailers and vans, enhance storage
efficiency, and can be used on the workbench
during hardware and radio installation.
$21.95 | sullivanproducts.com
Perfect for RC pilots and hobbyists, R TL
Fasteners offers bulk packaging for all
commonly used and specialty hardware.
Metric and standard SAE sizes are available
in small 10- to 100-count bags as well as in
handy assortment packaging. From standard
servo screws and nylon wing hold-down bolts
to socket-head screws, brass inserts, and
stainless steel hardware, RTL Fasteners
has it all.
$3.63 (2-56 x 3/8-in. Socket Head Cap
Screw, 24 pcs.); $98.95 (#1450 Standard
Assortment, 1,228 pcs.) | rtlfasteners.com
Harry Higley LeRoy’s Easy
These slot cutters make installing your
hinges perfectly aligned a piece of cake.
Specifically designed for instant CA glue
hinges, these tools are made out of
aluminum and use common no. 11 hobby
blades. Packed in pairs, the small hinger
uses a single blade, while the larger one
holds two blades for a wider slot.
$16.69 | harryhigley.com
Sullivan Sky Writer Smoke Pump
Electronically controlled, the Sky Writer Smoke Pump is an onboard smoke
system that is easy to set up and use. You can set the smoke fluid flow rate
with your transmitter. It works with 6- to 12-volt battery packs.
$94.99 | sullivanproducts.com
is a lightweight,
laminating and finishing model airplanes.
Whether you are fiberglassing the center
section of a wing or the entire airplane, Z-Poxy
is easy to mix and use. Ideal for sealing all
engine and fuel-tank areas, it is great for
sheeting foam wing panels. It will bond to
itself and doesn’t get brittle with age. The
Z-Poxy Finishing Resin (#PT- 41, 4 oz.) is perfect
to use with the new Fiberkit Fiberglassing Kit.
If you have never finished an RC airplane with
fiberglass cloth, the Fiberkit is a great way
to start. The new fiberglassing kit contains
all you need to get started including a brush,
a spreading card, sanding sticks, six mixing
sticks, and five mixing cups. You need to
supply your own fiberglass cloth, but Robart
has a great how-to video on its website to
guide you, step by step.
$9.95 (kit); $11.69 (resin) | robart.com